Strengthening mechanisms and Hall-Petch stress of ultrafine grained Al-0.3% Cu T Huang, L Shuai, A Wakeel, G Wu, N Hansen, X Huang Acta Materialia 156, 369-378, 2018 | 131 | 2018 |
Simple preparation and characterization of nano-crystalline zinc oxide thin films by sol-gel method on glass substrate M Saleem, L Fang, A Wakeel, M Rashad, CY Kong Scientific Research Publishing, 2012 | 84 | 2012 |
Scanning electron microscopy leads to identification of novel nonedible oil seeds as energy crops M Munir, M Ahmad, A Waseem, M Zafar, M Saeed, A Wakeel, M Nazish, ... Microscopy Research and Technique 82 (7), 1165-1173, 2019 | 23 | 2019 |
Development of a strong Goss texture during annealing of a heavily rolled Al—0.3% Cu alloy A Wakeel, TL Huang, GL Wu, OV Mishin, X Huang IOP Conference Series: Materials Science and Engineering 82 (1), 012050, 2015 | 9 | 2015 |
Effect of thermal cycling on the tensile behavior of Cf/Al fiber metal laminates MF Noor, RA Pasha, A Wakeel, MA Nasir, Y Bilal Advances in Science and Technology. Research Journal 11 (3), 80-86, 2017 | 8 | 2017 |
Structural and mechanical properties of friction stir welded Al2O3 and SiC reinforced Al 7075 alloys J Shafique, H Alrobei, A Wakeel, RA Malik, A Hussain, J Kim, M Latif Journal of Mechanical Science and Technology 35, 1437-1444, 2021 | 7 | 2021 |
Development of a strong Goss texture during annealing of a heavily rolled Al-0.3% Cu alloy. IOP Conference Series A Wakeel, TL Huang, GL Wu, OV Mishin, X Huang Materials Science and Engineering 82 (1), 012050, 2015 | 7 | 2015 |
Recrystallization textures and microstructures of Al-0.3% Cu alloy after deformation to high strains XR Li, A Wakeel, TL Huang, GL Wu, X Huang IOP Conference Series: Materials Science and Engineering 89 (1), 012032, 2015 | 5 | 2015 |
A review article on the synthesis of Silica Aerogels and their Insulation Properties A Wakeel, MA Nasir International Journal of Emerging Multidisciplinaries: Physical Sciences 1 (1), 2023 | 4 | 2023 |
Optimization of process parameters for shielded metal arc welding for ASTM A 572 grade 50 MS Afzal, A Wakeel, MA Nasir, MI Qazi, M Abas Journal of Engineering Research, 2024 | 2 | 2024 |
Optimization of TIG welding parameters for Ti-6Al-4V titanium alloy using the Taguchi design of experiment A Sattar, A Hussain, M Abbas, MN Azam, K Mehmood, A Wakeel, S Ali NUST Journal of Engineering Sciences 15 (2), 65-77, 2022 | 2 | 2022 |
Thermal Performance of Sintered Copper Wick Heat Pipe Using Water-Based Hybrid Nanofluids: An Experimental Study MA Hussain, F Jamil, A Ejaz, A Wakeel, S Khalid, HM Ali, MA Nasir, ... Journal of Porous Media 25 (10), 2022 | 2 | 2022 |
Computational analysis of high carbon steel for optimal design M Zubair, A Wakeel, MM Azeem, A Tabbassum 2021 International Bhurban Conference on Applied Sciences and Technologies …, 2021 | 2 | 2021 |
Experimental and Numerical Simulation of Brinell Hardness Test of Al7075 Alclad T6 in Abaqus A Wakeel, MA Nasir, RA Pasha, NA Anjum, J Shafique Technical Journal 23 (01), 53-57, 2018 | 2 | 2018 |
Structure and mechanical properties of nanostructured Al-0.3% Cu alloy A Wakeel, T Huang, G Wu, T Yu, N Hansen, X Huang Proceedings of the Risø International Symposium on Materials Science 35, 463-469, 2014 | 2 | 2014 |
Analysis of mechanical strength of Indium-doped SAC 105 lead-free solder alloy MS Hameed, A Wakeel, RA Pasha, B Ullah, U Ali Engineering Proceedings 45 (1), 18, 2023 | 1 | 2023 |
Investigation of Microstructure and Stress Corrosion Cracking in Al-6061-T6 Alloy at Different Loads M Nouman, A Wakeel, Z Anjum, A Asghar Pakistan Journal of Engineering and Technology 3 (03), 56-62, 2020 | 1 | 2020 |
PREPARATION AND CHARACTERIZATION OF ALUMINUM METAL MATRIX COMPOSITE REINFORCED WITH SiC/Al 2 O 3 AND METAL PARTICLES USING STIR CASTING PROCESS A Wakeel, MS Shahid, RA Pasha Pakistan Journal of Science 71 (4), 266, 2019 | 1 | 2019 |
Mechanical characterization of copper nanoparticles based glass fibre reinforced polymer composites MA Nasir, S Isaac, RA Pasha, A Wakeel, TU Rashid Technical Journal 23 (02), 35-39, 2018 | 1 | 2018 |
Finite element modeling of blocking force of ionic polymer metal composites (IPMC) in micro gripper OU Khan, WA Lughmani, A Wakeel, S ur Rehman 2017 13th International Conference on Emerging Technologies (ICET), 1-5, 2017 | 1 | 2017 |